Machines used for filling of aluminum or plastic tubes with gels, creams or other fluids, closing them (crimping or sealing) and stamping date.
The machine works in automatic mode – all activities except for feeding of tubes are done automatically.
Manual tube feeding by worker.
KEY FEATURES
• Mitsubishi PLC controller
• Servomechanism drive
• Sensor of fluid, allowing for automatic refilling of fluid to reservoir
• Date stamping device
• Volume of reservoir: 25 liters
Dosing volume (cylinder volume of filling device)
a. 5 – 20 ml
b. 8 – 30 ml
c. 15 – 60 ml
d. 28 – 110 ml
e. 40 – 160 ml
f. 53 – 210 ml
g. 65 – 260 ml
Model NTA-3 semiautomatic for ALUMINIUM TUBES
OUTPUT: 900 – 1500 tubes/h (depends on tube volume)
Tube diameter options: ø16 mm, ø19 mm, ø25 mm, ø30 mmk, ø35 mm, ø40 mm, ø50 mm
Tube height: 50 – 250 mm
Model TUB-3 semiautomatic for PLASTIC TUBES
Can be optionally equipped with euro- -slot punch.
OUTPUT: 1000-1800 tubes/h (depends on tube volume and tube sealing time)
Model TUB-3A automatic for PLASTIC TUBES
Can be optionally equipped with euro- -slot punch.
OUTPUT: 1000-1800 tubes/h (depends on tube volume and tube sealing time)
The machine will be manufactured in accordance with the EC directives and is marked with a CE mark.
Dimensions: 100 x 100 x 155 cm (NTA-3/TUB-3), 100 x 100 x 185 cm (TUB-3A)
Power supply: 230 V, 50 Hz
Installed capacity: 1,5 kW (NTA-3) , 3,6KW TUB-3/TUB3A
Air: 0,63 MPa, up to 500 l / min
Operation | NTA-3 | TUB-3 | TUB-3A |
Feeding of tubes | manual | manual | automatic |
Positioning of tubes | automatic | automatic | automatic |
Filling of tubes with fluid | automatic | automatic | automatic |
Closing of tubes | automatic | automatic | automatic |
Stamping date | automatic | automatic | automatic |
Control of fluid level in reservoir | automatic | automatic | automatic |
Throwing out of end-product | automatic | automatic | automatic |
TUBE SEALER , model NZT-100.
The device is used to seal and place date on plastic and laminated tubes, that have been previously filled with gels, creams or other liquids. The device is operated by one employee who inserts filled tubes, positions them and takes out filled tubes with date label.
• Laser pointers which help the operator to position tubes
TECHNICAL SPECIFICATION
Diameter of tubes: possible options – ø16 mm, ø19 mm, ø25 mm, ø30 mm, ø35 mm, ø40 mm, ø50 mm
Length of tubes: adjusted in the range 50 – 200 mm
Output: up to 900 tubes / hour
Operating staff: 1 employee
The device consists of the following elements:
Air heaters with automatic temperature setting
PLC controller (Unitronics)
Mechanical date stamp
Pneumatic elements (Metalwork)
Sensor of air temperature
Level of automation:
Manual inserting and positioning of tubes
Automatic heating of tubes
Automatic sealing of tubes
Manual removal of tubes from the device
Power: 230V, 50Hz, 3.4 kW
Air: up to 0,5 MPa, consumption up to 500 l/min
Dimensions (l x w x h): 79 cm x 47 cm x 69 cm
Weight: ~52 kg
Aluminum tube crimper ZTA-100
Device used for crimping (closing) of aluminum tubes, previously filled with gells, creams or other fluids.
The device is operated by one operator, whose task is to insert filled tubes, position them and remove tubes after they are closed.
• PLC controller
• Laser pointers which help the operator to position tubes
TECHNICAL DATA
The device is equipped with the following elements:
– PLC controller
– Pneumatic elements
– Closing jaws Material: the device is made of steel AISI 304.
Tube diameter (option to choose from): ø 16 – ø 50 mm
Tube height: can be adjusted in range 50 – 250 mm
Output efficiency: up to 500 pcs / h
Level of automation:
– Inserting and positioning of tubes: manual
– Closing (rolling) of tubes: automatic
– Taking out of closed tubes: manual
Dimensions (l x w x h): 79 cm x 47 cm x 69 cm
Weight: ~48 kg
Power: 230 V, 50Hz , Installed capacity: 0,2 kW
Air: 0,5 MPa, 100 l / min
The device is be manufactured in accordance with the EC directives and is marked with a CE mark:
Pneumatic tube cutter POD-400
Device used for cutting of endings of sealed plastic or laminated tubes.
The device can be optionallyequipped with euro-slot punch.
• Cutting blades with protection against mechanical injuries
• Foot pedal
• Diameter of tubes: ø16 – 50 mm
• Length of tubes: adjusted smoothly, 50 – 200 mm
• Output efficiency: up to 900 tubes / hour
• Compressed air required: up to 100 l/min, 0,5 MPa
• Dimensions: 30 x 30 x 45 cm
• Weight: ~13 kg
• The machine is manufactured in accordance with the EC directives and is marked with a CE mark.